The Influence of Four Commercial Wood-surface Treatments on Mould-fungi Growth in a Pure Culture

Not scheduled
3m
Belvedere Hotel

Belvedere Hotel

Dobrava 1a 6310 Izola, Slovenia

Speaker

Olena Myronycheva (Lulea University of Technology)

Description

The increased concern regarding mould on wood-based building materials has raised demand for sustainable biocidal treatments to protect early contamination during the construction stage of timber buildings. By providing surface protection for all type of wood-based construction elements already at the construction site will reduce the mould-associated risk for not only the construction elements but also for the indoor climate and dwellers at the use-stage of the building. The purpose was to test the protective effect of commercial water-based treatments containing different biocides on single mould fungi growth in pure culture.
Small specimens of Scots pine sapwood and heartwood, and Norway spruce were treated with four treatments, and a fungal test performed in 90 mm Petri plates. Two samples (treated and untreated control) placed on the plate with a distance between each other, and between, a fungal inoculum placed. Five pure cultures of fungi species used in the study: Aureobasidium sp., Trichoderma sp., Aspergillus sp., Cladosporium sp., Penicillium sp. The specimens exposed at the temperature of 24°C and relative humidity of 90%.
The treatments contained biocides, i.e.: treatment 1: tetramethylol acetylenediurea and iodopropynyl butyl carbamate (IPBC), treatment 2: mixture of several biocides (IPBC, benzisothiazolinone (BIT), methylisothiazolinone (MIT) and 5-chloro-2-methyl-1,2-thiazol-3-one (CMIT)/MIT mixture), treatment 3: IPBC; and treatment 4: mixture of propiconazole and IPBC.
The fungal growth observed in the untreated samples after four days of incubation, the specimens with treatment 4 attacked after eight days, when treatment 1 and 3 had free from fungal mycelia inhibition zone after 22 days of incubation. The moisture content after the test was similar for treated samples in plates with Aureobasidium sp., Aspergillus sp., Cladosporium sp., Penicillium sp., but was significantly higher for Trichoderma sp. The type of wood did not influence fungal growth in comparison to the type of treatment.

Keywords: biocide, wood, surface treatment, fungi, mould

Acknowledgements: First Author gratefully acknowledges receiving funding from pro-gramme Bioinnovation (IPOS-DP2), and from the Swedish Research Council for Environment, Agricultural Sciences and Spatial Planning (FORMAS), the project “Fungal growth on modified wood-based products under subarctic conditions” (2017-00419).

Consider my submission for a full-paper in the IPBE special edition for the conference? No, thanks.

Primary authors

Olena Myronycheva (Lulea University of Technology) Injeong Kim (Lulea University of Technology) Peter Jacobsson (Martinsons Byggsystem AB) Dr Olov Karlsson (Lulea University of Technology) Dr Margot Sehlstedt-Persson (Lulea University of Technology) Prof. Dick Sandberg (Lulea University of Technology)

Presentation materials